SAFE ON FILM.

Wrapped and PPF'd vehicles get ruined by products that were never meant for film. This kit removes that risk. Every product inside is safe on paint protection film, vinyl, and matte or satin finishes, and Shift actively boosts the ceramic top coat most installers put on your film. If your car just came off the wrap table, this is where you start.

• Shift boosts the top coat: A pH neutral, coating safe shampoo. Most PPF and wrap installs get a ceramic top coat, and Shift's Bead Booster enhances those hydrophobics every time you wash instead of stripping them down.
• Throttle is anti static and additive free: The anti static formula keeps dust from clinging to your film, and with no waxes or additives it will not mask the look or the properties of the film underneath. That matters on matte and satin, where a wax filled detail spray ruins the finish.
• Eco Shine covers the in between: A polymer rich waterless wash concentrate for light dust between full washes. Ceramic and film safe, and it stretches a long way at dilution.
• Pro adds the whole wash setup: The Foam Thrower, Flat Out Wash Pads, the Block Party wash block, and three sets of towels. Everything you need to run a safe contact wash from foam to final wipe.
• Two wash tools is not optional on film: Flat Out pads on the upper panels, Block Party on the lower sections. Grit dragged from the rockers up onto film is exactly how wraps get marred.

Base Kit includes:

• (1) Shift Ceramic Coating Soap, 16 oz.
• (1) Throttle Detail Spray, 16 oz.
• (1) Eco Shine Waterless Wash Concentrate, 32 oz.
• (1) Shine Supply 32 oz. Spray Bottle w/ Eco Shine Label

Pro Kit includes everything in the Base plus:

• (1) The Foam Thrower
• (1) Flat Out Wash Pads, 4 Pack
• (1) Block Party Wash Block
• (1) The Black Pearl Drying Towel, 16 x 16, 2 Pack
• (1) The 400 Towel, 5 Pack
• (1) The Cosmo Towel, 5 Pack

How to Use

The Full Wash

1. Load your Shift. Add 2 to 4 oz of Shift to The Foam Thrower, or to your wash bucket if you are running the Base kit.
2. Rinse the vehicle. Top down, knocking off the loose dirt before you make contact.
3. Foam it. Lay Shift over the whole vehicle and let it dwell. On the Base kit, skip to the bucket wash.
4. Upper panels, two panels per pad. The Flat Out pads are double sided. Wash a panel with one side, flip to the clean side, wash a second panel, then drop that pad in the rinse bucket and pull a fresh one out of the soap.
5. Recharge when you run out. Once all four pads are used, rinse them in the rinse bucket, put them back in the soap, and keep going.
6. Lower sections with the Block Party. Switch tools for the rockers, lower doors, and bumpers. That block never touches your upper panels.
7. Rinse carefully. Full rinse, but keep the pressure off seams and wrapped edges.
8. Dry with the Black Pearl. Move the water, don't push it around.
9. Finish with Throttle. Mist Throttle onto a Cosmo and wipe the vehicle down to perfect the finish.

In Between Washes

1. Check the dirt level first. This is for light dust and road film only. If the vehicle is genuinely dirty, wash it with water.
2. Dilute Eco Shine. Mix it with water in the included 32 oz bottle.
3. One panel at a time. Spray Eco Shine onto the panel and lift the dust off with a folded 400 towel in straight passes. Lift the debris, do not rub it in.
4. Flip between panels. Turn to a clean side after every panel so you are never dragging the last panel's dust onto the next one.
5. Keep the lowers separate. Use a dedicated 400 towel for the bottom sections and never bring it back up.
6. Finish with Throttle. Mist Throttle onto a Cosmo and wipe down for the final slick, clean result.