PURSUE PERFECTION.

Classic Finish Plus is the finest polish we offer. It works amazing on soft clear coats and softer paints like black, where it refines out minimal marring and leaves the paint looking perfect. Built with an exclusive blend of small micro-abrasives, it is a true finishing polish for that last step before protection.

• Small micro-abrasive: Finishes soft, tricky paint to crisp clarity without instilling new marring.
• No fillers, no residue: Wipes off effortlessly and leaves true reflections.
• Pads we pair with it: Any soft foam finishing pad, like the HDO black foam pad.
• Dial it in: Runs on a dual action at speed 3 to 4 with light arm-down pressure and a faster arm speed.
• Built for very soft paint: It is very fine, so it will not pull out a heavy amount of haze. It shines on very soft clear coats like GM black, or soft clears where the haze is light, and the small abrasive cleans that right up.

Not sure which compound or polish is right for your job? Our full guide breaks down every one, with cut and finish ratings, the pads we pair with each, and what to follow it with. 👉 Read the Compound & Polish Guide →

How to Use

1. Apply product to a soft black foam pad.
2. Set the tool to speed 3 to 4. Use light arm-down pressure and a faster arm speed.
3. Work the section until the haze is gone and the gloss comes up.
4. Wipe with a clean microfiber towel.

Detailer Tips

• On soft paint, use Classic Polish with a microfiber polishing pad first, then follow with Classic Finish Plus on a black foam pad.
• Before coating, use Throw Back to remove any light residue, then apply your Beadlock ceramic coating.
• Light pressure and a fast arm speed are the key. Think of it like shining a shoe on your last final passes.
• Works on all paint types, optimal on soft clear coats.