Great coating and easy to work with
Beadlock Marine Ceramic Coating
Life insurance for your watercraft.
Beadlock Marine Ceramic Coating creates a hard-sacrificial barrier which shields your watercraft and/or vehicle from the abuse coming from the sun and other harsh elements.
How does it work? Beadlock Marine Ceramic Coating contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass its strength and hardness. This integrated SiO2 technology makes this product far more durable and hydrophobic than any wax or sealant.
Product may be used on gel coats, boat bumper rails, vehicles, metal surfaces, glass and painted plastic surfaces.
Directions
Prep: Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.
Optional step if needed: Polish the surface to reduce any surface defects and create maximum gloss. Wipe down the surface with Throw Back paint cleanser to remove any oils/residue left from your polishing step.
Apply: Shake Beadlock Marine well. Apply directly onto the applicator pad and spread product evenly onto the surface. Product will have an “oil slick/rainbow” look to it as it begins to dry. This effect should begin within seconds. Give it a minimum of 60 seconds to set up and then remove using a clean microfiber towel. How do you know it’s ready to be removed? Perform a test spot with your microfiber towel. The coating will have some slight resistance when you wipe. This slight resistance lets you know it’s ready for removal. If you have difficulty removing the product, you waited too long. Using an additional towel, lightly wipe over the area again to ensure product is even and level on the surface. Once you have wiped with the second towel the coating will begin to “set-up”. Do not go back into an area minutes later and re-wipe or you could cause streaking.
MAINTENANCE TIPS!
- Always use Shine Supply Aftermath water spot remover/detail spray immediately after docking the boat. This will quickly remove the water spots and hydrate the coating.
- For stubborn water spots use Shine Supply Wake-Up ceramic cleaner wax by hand to quickly remove.
- Use Shine Supply Wake-Up ceramic cleaner wax to revive the coating and build up additional protection.
FAQ's
- Q - What’s the difference between Beadlock Marine coating and our Beadlock Pro?
- A - Beadlock Marine is 2.5x more concentrated than BLP and has a solvency customized for the marine climate - it’s designed for use in hot, humid climates. The higher concentration provides for a single coat application whereas lower concentrated coatings such as BLP require several layers due to the porous aspect of gel coat.
- Q - How many boats can you coat with a 50ml bottle?
- A - (1) Malibu LSV 23 or similar size boat.
- Q - Can you apply to travel trailers, motor homes, wave runners, etc?
- A - Yes!
- Q - Can you apply multiple coats? And how many?
- A - Although a single layer is extremely adequate protection - yes you can! Make sure you wait (1) hour in between coats.
- Q - When is the coating dry?
- A - Coating is dry within (1) hour of application. After (1) hour you can stack the coating with another layer if you choose or wipe down with Punch-It synergy spray to make the surface even slicker!
- Q - When is the coating fully cured?
- A - Coating is fully cured and hardened after 48 hours. It's best to avoid water contact during this period if possible. If water contact happens, make sure you dry the surface to avoid any water spotting.
- Q - Can you still get water spots on your boat if it's ceramic coated?
- A - Ceramic Coating is harder than your boats gel coat so it does provide superior protection against water spot etching BUT water spot etching can still happen if you are negligent with how you care for the coating. ALWAYS wipe the surface down with Shine Supply Aftermath water spot remover immediately upon docking the boat to prevent minerals in the water from etching the coating.
Coating Specs:
- Hardness: >9H
- pH resistance: 2-13
- Durability: up to 2 years (aquatic)
- Thickness: single layer 4-5 microns
- Contact angle: 110°
Beadlock Marine Ceramic Coating
Sale price$145.00
Regular price
Choose options
Beadlock Marine Ceramic Coating
Sale price$145.00
Regular price
Customer Reviews
Overall rating: 5.0 / 5 from 70 reviews.
Been testing Shine Supply Marine Ceramic Coating on this 29ft RV restoration and I’m honestly impressed with the gloss, slickness, and ease of application so far. The finish is looking deep and extremely reflective even on older oxidized paint. Looking forward to seeing the long-term protection and water behavior after full cure. Appreciate you guys giving me the opportunity to test it in a real-world detail shop environment.
These two turned out great! Easy to use, looks amazing, great protection!
Phenomenal product performance! Easy to work with and great results. I am thankful I chose Marine for the extra work time. Really great experience! I got the 100ml, so I can do my other truck and then some.
I would buy again, large size was perfect for this 28 for world cat.
Works great everytime
My boat has a bad jel coat. You can see the big difference in the area that was done and the bottom of the bow that was not... Nothing else has worked on this boat.. Other products looked good for a week than went back to the way the bottom of the bow does...
great product
I love the Marine coatings. It is all I have installed since switching to Shine Supply. The hydrophobics and gloss combined with durability is phenomenal.
Love the product, easy to apply makes the boat look like new
I used classic polish along with beadlock glass on all of the windows as well as beadlock marine on all of the painted surfaces. This vehicle is a 2024 Caviar Black Lexus Gx550
Best coating hands down! Great shine and hydrophobic action!
Definitely my go-to ceramic coating.
easy to use, and puts the final shine on the detailed boat
Beadlock Marine ease of use is phenomenal! First time using this coating and it was awesome!
Awesome product. I apply once a year after washing with ceramic safe soap. Shines all summer.
The Marine formula offers a tougher protection without any extra steps or difficult preparation.
Best products in the market
Easy to install, stunning gloss! Love this company and Love this product!
Amazing product. I buffed the boat with Chop Top 3 years ago and applied Beadlock marine, the results were amazing and lasted for the whole summer. Each spring all I do is wash with a soapy sponge and re-apply. I'll never wax again.
My boat has a bad gelcoat. The entire boat looked like the front bow which we didn't do. We tried many different products that didn't work. The Beadlock Marine Ceramic has made a great difference..
Never lets us down!
A1 service all the time , products are the best since day one I started using them.
Always had a great experience with using shine supply products. There ceramic coatings are Easy to apply and results are amazing.
Pictures don’t lie, Great Coating!
Shine Supply has been consistently impressive with their service and products. They’re quick to ship our orders, always making next-day delivery possible, which is a game-changer for our business. Even better, their products are something we can confidently stand behind. Whether it's detailing or maintenance, Shine Supply offers quality that we trust and rely on every day. Highly recommend to customers for keeping the best results.
Didn’t realize I could coat a vehicle with marine coating until Valerie educated me! Came out pristine with a two stage correction!
Works Fantastic. As the manager of a high level detailing service beadlock pro is incredible stuff!!
Easy to apply. Super shine and hard as woodpecker lips! Also Valarie is great! Wonderful customer service. Will definitely be a return customer.
Great product!
First time using the marine grade and wow this truck turned out great! The customer said thanks for making my truck look like a tuxedo!! Great product!!
Mic 🎤 drop!!! So easy to apply and to remove.
I’ve owned two coating & detailing companies and I can always count on Beadlock Marine. It’s highly concentrated, one 100ml bottle goes a long way, installs easily, and performs very well.
Great product easy to apply my customer and I were very impressed with the results I will definitely be ordering more
10th application of this coating. I don't get stuck with high spots, leaves a durable and brilliant shine/reflection. Keeps my customers happy and maintenence washes a breeze.
I've worked with shine supply for about 10 years I believe I have almost every product that they make I am not a detailer I only detail my own cars I did go to school to get a master detailing certificate and I can tell you that there is not a better place to buy products from or better people to work with they are just great. I cannot say enough good about shine supply
My go too ceramic coating with quick shipping
Best ceramic coating I've found.
Truly magic. I dont even need to use my windshield wipers in the rain anymore 😅
Great buy and will buy again