WASH OFF THE WEEKEND.

Your UTV is built to get filthy. The UTV Cleaning Kit is built to undo it. Hole Shot does the cleaning without staining or attacking the delicate stuff, then Clutch goes over the plastics, powder coat, billet, and vinyl to bring the color back and leave ceramic protection behind. Clean 'N Shine handles the inside. Available with or without The Foam Thrower depending on whether you already own a cannon.

• Hole Shot is the workhorse: A non caustic prep wash that cuts through mud, dust, and trail film without staining plastics or eating up the delicate parts. Tough on the grime, easy on the machine.
• Clutch brings the plastics back: Spray it on exterior plastics, powder coated tube, billet wheels, and vinyl. It rejuvenates faded finishes and darkens them back up without leaving a sticky, tacky surface that grabs the next cloud of trail dust.
• Protection that pays off next time: The ceramic in Clutch leaves a slick barrier on every surface you put it on, so the next wash takes a fraction of the effort. That's the real win on a machine that gets dirty every single ride.
• Interior handled too: Clean 'N Shine with the white applicator cleans and conditions seats, dash, and floors in one step.
• Ten Taddy Towels, not two: Red Taddys are 300gsm terry, the towel you use for grunt work and don't feel bad about. Ten of them, because a UTV eats towels.
• Careful around the electronics: Never blast the dash, gauges, or switch panel with a pressure washer. Rinse those areas gently or wipe them by hand.
• Not a ceramic coating: Clutch is a spray sealant. It restores and protects for weeks, not years. If you want long term protection on a rig that lives outside, coat it properly first and use this kit to maintain it.

Kit includes:

• (1) Hole Shot Prep Wash, 32 oz.
• (1) Clutch Ceramic Spray Sealant, 16 oz.
• (1) Clean 'N Shine Interior Detailer, 16 oz.
• (1) Scrub Brush
• (1) Large Blue Microfiber Applicator Pad
• (1) Large White Applicator Pad
• (1) The Taddy Towel, 10 Pack, Red

With Foam Thrower option adds:

• (1) The Foam Thrower

How to Use

1. Pre rinse. Knock the loose mud and dust off the whole machine before anything else.
2. Load your Hole Shot. Add 5 to 10 oz of Hole Shot & the rest water to The Foam Thrower, or to your wash bucket if you're running the kit without a cannon.
3. Cover the machine. Foam or wash every surface: body plastics, cage, suspension, wheels, tires, floors, and seats. Let it dwell and start breaking down the trail film.
4. Agitate. Scrub the tires, suspension, and rough body plastics with The Tire Tamer XL. Use a wash mitt (not included) on the smoother plastics and painted surfaces.
5. Rinse and dry. Rinse everything down and dry it off. Go easy around the dash, gauges, and switch panel.
6. Clutch the exterior. Spray Clutch onto the Large Blue Microfiber Applicator Pad and work it across exterior plastics, powder coated tube, billet wheels, and vinyl. For tight spots, spray Clutch directly on the surface instead.
7. Wipe it off. Level and remove the Clutch with a red Taddy Towel. Flip to a clean side as you go.
8. Interior last. Apply Clean 'N Shine with the Large White Applicator Pad across seats, dash, and floors, then wipe it down with a fresh Taddy Towel.