PROTECT YOUR INVESTMENT

The PPF Kit is built for vehicles wrapped in paint protection film or vinyl. Every product inside is safe for film and matte or satin finishes. If you just had your car wrapped or PPF'd, this is the kit you start with.

• Shift Soap 16oz: pH neutral, coating safe shampoo. Most PPF and wraps come with a ceramic top coat from the installer, and Shift's Bead Booster enhances those hydrophobic properties every time you wash. Slick, lubricated, and built for protected surfaces.
• Throttle 16oz: Anti static, wax free, additive free detail spray. The anti static formula keeps dust from sticking to your film, and with zero additives, it won't mask or hide the properties of the film underneath.
• Eco Shine Waterless Wash 32oz: For between full washes. Polymer rich concentrate that safely lifts dust without running water. Ceramic and film safe.
• Flat Out Wash Pads: Plush microfiber pads that glide over film without putting swirls in the surface.
• Block Party Wash Block: A dedicated pad for the lower 6 inches of the vehicle. Keeps the heaviest debris off your upper panel wash pads.
• Foam Thrower Variant: Choose the version with the Foam Thrower if you want hands free soap application. The foam carries Shift onto the surface so you can go straight to agitating with your Flat Out wash pads.

How to Use

Wash (Standard Kit)

1. Pre rinse the vehicle thoroughly.
2. Mix Shift Soap in a wash bucket per the dilution instructions.
3. Wash the upper panels with a Flat Out Wash Pad using the two bucket method. Use one side per panel, after each side is used, swap to another pad.
4. Switch to the Block Party Wash Block for the lower 6 inches.
5. Rinse fully and be mindful of seams and wrapped edges to avoid lifting.
6. Dry with a plush microfiber drying towel.
7. Mist Throttle onto a clean microfiber  and wipe down the vehicle to perfect the finish.

Wash (Foam Thrower Variant)

1. Pre rinse the vehicle thoroughly.
2. Fill the Foam Thrower with Shift Soap per the included instructions.
3. Apply foam to the vehicle to lay the soap down on the surface.
4. Agitate the upper panels with  Flat Out Wash Pads.
5. Switch to the Block Party Wash Block for the lower 6 inches.
6. Rinse fully and be mindful of seams and wrapped edges to avoid lifting.
7. Dry with a plush microfiber drying towel.
8. Mist Throttle onto a clean microfiber  and wipe down the vehicle to perfect the finish.

Waterless Wash (Between Full Washes)

1. Mix 2 oz of Eco Shine with water in the included 32 oz spray bottle and shake gently.
2. Confirm the vehicle has only light dust or normal road grime.
3. Spray Eco Shine onto one panel at a time.
4. Wipe in straight lines with a clean microfiber, flipping to a fresh side after each pass.
5. Use a dedicated towel for the lower 6 inches to avoid cross contamination.
6. Finish with a wipe of Throttle for a clean, slick result.

Detailer Tips

• Throttle is a great option for PPF and wraps because it's anti static (won't attract dust to your film) and contains no additives, so it won't mask the look or properties of the film underneath.
• The Flat Out and Block Party combo is non negotiable. Block Party for the lower section, Flat Out for the upper. Never mix them.
• Most PPF and wraps come with a ceramic top coat from the installer. Shift's Bead Booster amplifies the hydrophobic properties of that coating every time you wash.
• If you have a ceramic coating on top of your PPF, this kit still works amazing. Shift and Throttle are a great combo for protected surfaces.
• When rinsing, be mindful of the seams and wrapped edges to avoid lifting over time.