Beadlock Wheel & Suspension Ceramic Coating Kit

Your wheels take the most abuse. BEADLOCK is their armor.

This high-temp ceramic coating lays down a tough, flexible layer that shields your wheels and suspension from brake dust, grime, and UV damage. Built with SiO₂ (the same component that gives glass its hardness) blended with elastic polymers, BEADLOCK creates a durable, hydrophobic surface that flexes with the metal instead of cracking.

Safe for all finishes - raw metal, chrome, powder coat, anodized, painted, and polished aluminum.

How It Works

BEADLOCK outperforms waxes and sealants because it cures into a hardened layer that absorbs impacts while resisting heat, dirt, and UV damage.

• Durability: About 1 year with proper maintenance. Harsh conditions (snow, salt, off-road) may need reapplication in spring.

• Maintenance: Clean with Shift Soap, Cool Guy (as needed), and boost with Punch-It. Avoid harsh cleaners to extend life.

• Polished Aluminum: Excellent on American Force or Alcoa wheels. Reapply twice yearly due to porosity. Maintain with Cloud9 + Throw Back before recoating. Use Eco Shine or Shine Soap for cleaning (avoid Punch-It or Clutch).

Black powder coated wheel:

Left side is the factory finish / Right side coated with BEADLOCK 

Kit Includes:

• 80ml BEADLOCK Wheel Coating

• 4oz Throwback Prep Cleaner

• 4oz Punch-It Maintenance Spray

• Coating Applicator Pad

• Leveling Microfiber Towel

• 2 Black Sprayers (1 spare)

• Pair of Blue Gloves

• Instruction & Pro Tips Card

Quick Application (3 Steps)

1. Clean surface with Throw Back paint cleanser.

2. Apply BEADLOCK with an applicator pad (rainbows in ~1 min).

3. Let set for minimum 5 min, then wipe clear with a microfiber.

Directions

1. Clean the surface thoroughly with Throw Back paint cleanser.

2. Shake BEADLOCK well.

3. Spray onto the surface or directly onto the applicator pad.

4. Spread evenly with the applicator pad. The coating will begin to “rainbow” within about a minute.

5. Let the coating set up for a minimum of 5 minutes, then wipe off with a clean microfiber. Use a fresh side or second towel for an even finish.

Pro Tips

• Cover rotors or unwanted areas with a towel to avoid over-spray.

• An 80ml bottle coats roughly 4–6 sets of wheels (depending on size).

• Swipe Test: Before removal, wrap two fingers with a microfiber and swipe the surface. If it breaks clear (not smeary), the coating is ready to wipe.

Maintenance

• Use Cool Guy only if heavy brake dust builds up - otherwise, Shift Soap and water are all you need.

• Clean and agitate the wheel surface with Detail Factory brushes to safely lift grime without harming the coating.

• After each wash, apply Punch-It to keep the surface slick, glossy, and hydrophobic.